MultiView

simlogo1

SimQuest 6.4 help

MultiView

With a MultiView, you can present more than one interface within a single interface.
Using tab sheets, your learner can choose between the interfaces you selected.

Tab sheet: Basics

1.	Click the Basics tab sheet.

2.	Select a font.

3.	If you want your learner to be able to scroll through the tab sheet using the tab-key, click the Can tab check box.

4.	Click Apply.

Tab sheet: SubView

1.	Click the SubView tab sheet.

2.	Drag the interface(s) you want to appear in the MultiView from the Application window and drop them into the SubView tab sheet.

3.	Change the order of the interfaces using the arrows on the right.

4.	Click Apply.

Tab sheet: Colour

1.	Click the Colour tab sheet.

2.	Select a colour from the palette. You can also type a value for the Red, Green and Blue value (0-255) or use the sliders.

3.	Indicate whether the color is for the Text, background, ca or cb?

4.	Click Apply.

Tab sheet: Position

Please note! Using this tab sheet to set the position is optional. Instead of dragging and resizing, you can use the Position tab sheet to specify relative and absolute positions.

Click the Position tab sheet.
- Left, Top, Right, an Bottom, refer to the four sides of the element.
- Relative Position refers to the position on the window, where the maximum left and top side of the window refer to 0, and the maximum right and bottom side of the window refer to 1.
- Offset refers to the amount of pixels from the topleft corner of the window.

2.	Determine the relative position of the left, top, right, and bottom side of the element by typing values between 0 and 1 in the appropriate Relative Position boxes.

3.	Determine the size of the element by typing the amount of pixels in the appropriate Offset boxes.

4.	Click Apply.